Installing a Brick Paver Walkway or Brick Hammer

The usage of Bricks or Pavers to develop a pathway or patio area matches a house in a method that is unmatched. In addition, setting up a Brick or Paver pathway does not always need a pro.

The key to installing a Brick or Paver Walkway is to first effectively prepare the area where the bricks/pavers are to be installed. The location ought to be removed a minimum of a foot down, getting rid of all topsoil and clay soil. In addition, string lines need to be strung on each side of the walkway. The string lines show the completed height of the pathway.
As soon as the location has been dug down, 3/4" gravel stone must be laid in and tamped down securely. The height between the tamped down sand and the stringline ought to equal the thickness of the brick or paver.

Now that you have a steady base, place a 1" pipe or journal board the length of the pathway on either side of the walkway. Utilizing a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level surface area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Set up an operate on both sides of the ready area. These strips will function as your sidewalk border and assistance to preserve the stability and shape of the pathway. You can get these plastic strip borders at the majority of home improvement shops. The strips must be anchored down with 12" galvinized nails. You should sink these nails into the ground and through the strips every foot.

The key to laying the bricks/pavers is to ensure that they cheapest brick interlock with each other. Always stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will once again help keep the integrity of the pathway.

Inevitably bricks/pavers will require to be cut or split when building the pathway. To actually cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the area where you desire to break the brick. If your sidewalk has curves you will need to buy/rent a wetsaw.

After installing the bricks, develop the outdoors edges with extra sand, and then shovel in the topsoil and load down firmly.
Spread stone dust over the new pathway and sweep into the fractures. This will finish the interlocking of the bricks and help to get rid of any weed development.


In addition, setting up a Brick or Paver walkway does not necessarily need a pro. building brick The secret to setting up a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be installed. Now that you have a stable base, put a 1" pipeline or journal board the length of the pathway on either side of the sidewalk. These strips will act as your sidewalk border and help to maintain the integrity and shape of the sidewalk. Inevitably bricks/pavers will require to be cut or divided when building the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *